Commit 2758e242fe5a397e7716d1d9b351b31f09650428

Authored by Jens Rosenboom
1 parent 9b5f56ed
Exists in master and in 2 other branches v2, v3

remove autogenerated files from repository

... ... @@ -1,234 +0,0 @@
1   -Installation Instructions
2   -*************************
3   -
4   -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
5   -2006 Free Software Foundation, Inc.
6   -
7   -This file is free documentation; the Free Software Foundation gives
8   -unlimited permission to copy, distribute and modify it.
9   -
10   -Basic Installation
11   -==================
12   -
13   -Briefly, the shell commands `./configure; make; make install' should
14   -configure, build, and install this package. The following
15   -more-detailed instructions are generic; see the `README' file for
16   -instructions specific to this package.
17   -
18   - The `configure' shell script attempts to guess correct values for
19   -various system-dependent variables used during compilation. It uses
20   -those values to create a `Makefile' in each directory of the package.
21   -It may also create one or more `.h' files containing system-dependent
22   -definitions. Finally, it creates a shell script `config.status' that
23   -you can run in the future to recreate the current configuration, and a
24   -file `config.log' containing compiler output (useful mainly for
25   -debugging `configure').
26   -
27   - It can also use an optional file (typically called `config.cache'
28   -and enabled with `--cache-file=config.cache' or simply `-C') that saves
29   -the results of its tests to speed up reconfiguring. Caching is
30   -disabled by default to prevent problems with accidental use of stale
31   -cache files.
32   -
33   - If you need to do unusual things to compile the package, please try
34   -to figure out how `configure' could check whether to do them, and mail
35   -diffs or instructions to the address given in the `README' so they can
36   -be considered for the next release. If you are using the cache, and at
37   -some point `config.cache' contains results you don't want to keep, you
38   -may remove or edit it.
39   -
40   - The file `configure.ac' (or `configure.in') is used to create
41   -`configure' by a program called `autoconf'. You need `configure.ac' if
42   -you want to change it or regenerate `configure' using a newer version
43   -of `autoconf'.
44   -
45   -The simplest way to compile this package is:
46   -
47   - 1. `cd' to the directory containing the package's source code and type
48   - `./configure' to configure the package for your system.
49   -
50   - Running `configure' might take a while. While running, it prints
51   - some messages telling which features it is checking for.
52   -
53   - 2. Type `make' to compile the package.
54   -
55   - 3. Optionally, type `make check' to run any self-tests that come with
56   - the package.
57   -
58   - 4. Type `make install' to install the programs and any data files and
59   - documentation.
60   -
61   - 5. You can remove the program binaries and object files from the
62   - source code directory by typing `make clean'. To also remove the
63   - files that `configure' created (so you can compile the package for
64   - a different kind of computer), type `make distclean'. There is
65   - also a `make maintainer-clean' target, but that is intended mainly
66   - for the package's developers. If you use it, you may have to get
67   - all sorts of other programs in order to regenerate files that came
68   - with the distribution.
69   -
70   -Compilers and Options
71   -=====================
72   -
73   -Some systems require unusual options for compilation or linking that the
74   -`configure' script does not know about. Run `./configure --help' for
75   -details on some of the pertinent environment variables.
76   -
77   - You can give `configure' initial values for configuration parameters
78   -by setting variables in the command line or in the environment. Here
79   -is an example:
80   -
81   - ./configure CC=c99 CFLAGS=-g LIBS=-lposix
82   -
83   - *Note Defining Variables::, for more details.
84   -
85   -Compiling For Multiple Architectures
86   -====================================
87   -
88   -You can compile the package for more than one kind of computer at the
89   -same time, by placing the object files for each architecture in their
90   -own directory. To do this, you can use GNU `make'. `cd' to the
91   -directory where you want the object files and executables to go and run
92   -the `configure' script. `configure' automatically checks for the
93   -source code in the directory that `configure' is in and in `..'.
94   -
95   - With a non-GNU `make', it is safer to compile the package for one
96   -architecture at a time in the source code directory. After you have
97   -installed the package for one architecture, use `make distclean' before
98   -reconfiguring for another architecture.
99   -
100   -Installation Names
101   -==================
102   -
103   -By default, `make install' installs the package's commands under
104   -`/usr/local/bin', include files under `/usr/local/include', etc. You
105   -can specify an installation prefix other than `/usr/local' by giving
106   -`configure' the option `--prefix=PREFIX'.
107   -
108   - You can specify separate installation prefixes for
109   -architecture-specific files and architecture-independent files. If you
110   -pass the option `--exec-prefix=PREFIX' to `configure', the package uses
111   -PREFIX as the prefix for installing programs and libraries.
112   -Documentation and other data files still use the regular prefix.
113   -
114   - In addition, if you use an unusual directory layout you can give
115   -options like `--bindir=DIR' to specify different values for particular
116   -kinds of files. Run `configure --help' for a list of the directories
117   -you can set and what kinds of files go in them.
118   -
119   - If the package supports it, you can cause programs to be installed
120   -with an extra prefix or suffix on their names by giving `configure' the
121   -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
122   -
123   -Optional Features
124   -=================
125   -
126   -Some packages pay attention to `--enable-FEATURE' options to
127   -`configure', where FEATURE indicates an optional part of the package.
128   -They may also pay attention to `--with-PACKAGE' options, where PACKAGE
129   -is something like `gnu-as' or `x' (for the X Window System). The
130   -`README' should mention any `--enable-' and `--with-' options that the
131   -package recognizes.
132   -
133   - For packages that use the X Window System, `configure' can usually
134   -find the X include and library files automatically, but if it doesn't,
135   -you can use the `configure' options `--x-includes=DIR' and
136   -`--x-libraries=DIR' to specify their locations.
137   -
138   -Specifying the System Type
139   -==========================
140   -
141   -There may be some features `configure' cannot figure out automatically,
142   -but needs to determine by the type of machine the package will run on.
143   -Usually, assuming the package is built to be run on the _same_
144   -architectures, `configure' can figure that out, but if it prints a
145   -message saying it cannot guess the machine type, give it the
146   -`--build=TYPE' option. TYPE can either be a short name for the system
147   -type, such as `sun4', or a canonical name which has the form:
148   -
149   - CPU-COMPANY-SYSTEM
150   -
151   -where SYSTEM can have one of these forms:
152   -
153   - OS KERNEL-OS
154   -
155   - See the file `config.sub' for the possible values of each field. If
156   -`config.sub' isn't included in this package, then this package doesn't
157   -need to know the machine type.
158   -
159   - If you are _building_ compiler tools for cross-compiling, you should
160   -use the option `--target=TYPE' to select the type of system they will
161   -produce code for.
162   -
163   - If you want to _use_ a cross compiler, that generates code for a
164   -platform different from the build platform, you should specify the
165   -"host" platform (i.e., that on which the generated programs will
166   -eventually be run) with `--host=TYPE'.
167   -
168   -Sharing Defaults
169   -================
170   -
171   -If you want to set default values for `configure' scripts to share, you
172   -can create a site shell script called `config.site' that gives default
173   -values for variables like `CC', `cache_file', and `prefix'.
174   -`configure' looks for `PREFIX/share/config.site' if it exists, then
175   -`PREFIX/etc/config.site' if it exists. Or, you can set the
176   -`CONFIG_SITE' environment variable to the location of the site script.
177   -A warning: not all `configure' scripts look for a site script.
178   -
179   -Defining Variables
180   -==================
181   -
182   -Variables not defined in a site shell script can be set in the
183   -environment passed to `configure'. However, some packages may run
184   -configure again during the build, and the customized values of these
185   -variables may be lost. In order to avoid this problem, you should set
186   -them in the `configure' command line, using `VAR=value'. For example:
187   -
188   - ./configure CC=/usr/local2/bin/gcc
189   -
190   -causes the specified `gcc' to be used as the C compiler (unless it is
191   -overridden in the site shell script).
192   -
193   -Unfortunately, this technique does not work for `CONFIG_SHELL' due to
194   -an Autoconf bug. Until the bug is fixed you can use this workaround:
195   -
196   - CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
197   -
198   -`configure' Invocation
199   -======================
200   -
201   -`configure' recognizes the following options to control how it operates.
202   -
203   -`--help'
204   -`-h'
205   - Print a summary of the options to `configure', and exit.
206   -
207   -`--version'
208   -`-V'
209   - Print the version of Autoconf used to generate the `configure'
210   - script, and exit.
211   -
212   -`--cache-file=FILE'
213   - Enable the cache: use and save the results of the tests in FILE,
214   - traditionally `config.cache'. FILE defaults to `/dev/null' to
215   - disable caching.
216   -
217   -`--config-cache'
218   -`-C'
219   - Alias for `--cache-file=config.cache'.
220   -
221   -`--quiet'
222   -`--silent'
223   -`-q'
224   - Do not print messages saying which checks are being made. To
225   - suppress all normal output, redirect it to `/dev/null' (any error
226   - messages will still be shown).
227   -
228   -`--srcdir=DIR'
229   - Look for the package's source code in directory DIR. Usually
230   - `configure' can determine that directory automatically.
231   -
232   -`configure' also accepts some other, not widely useful, options. Run
233   -`configure --help' for more details.
234   -
Makefile.in
... ... @@ -1,669 +0,0 @@
1   -# Makefile.in generated by automake 1.10 from Makefile.am.
2   -# @configure_input@
3   -
4   -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5   -# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
6   -# This Makefile.in is free software; the Free Software Foundation
7   -# gives unlimited permission to copy and/or distribute it,
8   -# with or without modifications, as long as this notice is preserved.
9   -
10   -# This program is distributed in the hope that it will be useful,
11   -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12   -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13   -# PARTICULAR PURPOSE.
14   -
15   -@SET_MAKE@
16   -
17   -# Top-level GF-Complete AM file
18   -# Distributes headers
19   -
20   -VPATH = @srcdir@
21   -pkgdatadir = $(datadir)/@PACKAGE@
22   -pkglibdir = $(libdir)/@PACKAGE@
23   -pkgincludedir = $(includedir)/@PACKAGE@
24   -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
25   -install_sh_DATA = $(install_sh) -c -m 644
26   -install_sh_PROGRAM = $(install_sh) -c
27   -install_sh_SCRIPT = $(install_sh) -c
28   -INSTALL_HEADER = $(INSTALL_DATA)
29   -transform = $(program_transform_name)
30   -NORMAL_INSTALL = :
31   -PRE_INSTALL = :
32   -POST_INSTALL = :
33   -NORMAL_UNINSTALL = :
34   -PRE_UNINSTALL = :
35   -POST_UNINSTALL = :
36   -build_triplet = @build@
37   -host_triplet = @host@
38   -subdir = .
39   -DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \
40   - $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
41   - $(top_srcdir)/configure $(top_srcdir)/include/config.h.in \
42   - AUTHORS COPYING ChangeLog INSTALL NEWS config.guess config.sub \
43   - install-sh ltmain.sh missing
44   -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
45   -am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_compile_flag.m4 \
46   - $(top_srcdir)/m4/ax_ext.m4 \
47   - $(top_srcdir)/m4/ax_gcc_x86_avx_xgetbv.m4 \
48   - $(top_srcdir)/m4/ax_gcc_x86_cpuid.m4 \
49   - $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
50   - $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
51   - $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
52   -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
53   - $(ACLOCAL_M4)
54   -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
55   - configure.lineno config.status.lineno
56   -mkinstalldirs = $(install_sh) -d
57   -CONFIG_HEADER = $(top_builddir)/include/config.h
58   -CONFIG_CLEAN_FILES =
59   -depcomp =
60   -am__depfiles_maybe =
61   -SOURCES =
62   -DIST_SOURCES =
63   -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
64   - html-recursive info-recursive install-data-recursive \
65   - install-dvi-recursive install-exec-recursive \
66   - install-html-recursive install-info-recursive \
67   - install-pdf-recursive install-ps-recursive install-recursive \
68   - installcheck-recursive installdirs-recursive pdf-recursive \
69   - ps-recursive uninstall-recursive
70   -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
71   -am__vpath_adj = case $$p in \
72   - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
73   - *) f=$$p;; \
74   - esac;
75   -am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
76   -am__installdirs = "$(DESTDIR)$(includedir)"
77   -includeHEADERS_INSTALL = $(INSTALL_HEADER)
78   -HEADERS = $(include_HEADERS)
79   -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
80   - distclean-recursive maintainer-clean-recursive
81   -ETAGS = etags
82   -CTAGS = ctags
83   -DIST_SUBDIRS = $(SUBDIRS)
84   -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
85   -distdir = $(PACKAGE)-$(VERSION)
86   -top_distdir = $(distdir)
87   -am__remove_distdir = \
88   - { test ! -d $(distdir) \
89   - || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
90   - && rm -fr $(distdir); }; }
91   -DIST_ARCHIVES = $(distdir).tar.gz
92   -GZIP_ENV = --best
93   -distuninstallcheck_listfiles = find . -type f -print
94   -distcleancheck_listfiles = find . -type f -print
95   -ACLOCAL = @ACLOCAL@
96   -AMTAR = @AMTAR@
97   -AR = @AR@
98   -AUTOCONF = @AUTOCONF@
99   -AUTOHEADER = @AUTOHEADER@
100   -AUTOMAKE = @AUTOMAKE@
101   -AWK = @AWK@
102   -CC = @CC@
103   -CFLAGS = @CFLAGS@
104   -CPP = @CPP@
105   -CPPFLAGS = @CPPFLAGS@
106   -CYGPATH_W = @CYGPATH_W@
107   -DEFS = @DEFS@
108   -DSYMUTIL = @DSYMUTIL@
109   -DUMPBIN = @DUMPBIN@
110   -ECHO_C = @ECHO_C@
111   -ECHO_N = @ECHO_N@
112   -ECHO_T = @ECHO_T@
113   -EGREP = @EGREP@
114   -EXEEXT = @EXEEXT@
115   -FGREP = @FGREP@
116   -GREP = @GREP@
117   -INSTALL = @INSTALL@
118   -INSTALL_DATA = @INSTALL_DATA@
119   -INSTALL_PROGRAM = @INSTALL_PROGRAM@
120   -INSTALL_SCRIPT = @INSTALL_SCRIPT@
121   -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
122   -LD = @LD@
123   -LDFLAGS = @LDFLAGS@
124   -LIBOBJS = @LIBOBJS@
125   -LIBS = @LIBS@
126   -LIBTOOL = @LIBTOOL@
127   -LIPO = @LIPO@
128   -LN_S = @LN_S@
129   -LTLIBOBJS = @LTLIBOBJS@
130   -MAINT = @MAINT@
131   -MAKEINFO = @MAKEINFO@
132   -MKDIR_P = @MKDIR_P@
133   -NM = @NM@
134   -NMEDIT = @NMEDIT@
135   -OBJDUMP = @OBJDUMP@
136   -OBJEXT = @OBJEXT@
137   -OTOOL = @OTOOL@
138   -OTOOL64 = @OTOOL64@
139   -PACKAGE = @PACKAGE@
140   -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
141   -PACKAGE_NAME = @PACKAGE_NAME@
142   -PACKAGE_STRING = @PACKAGE_STRING@
143   -PACKAGE_TARNAME = @PACKAGE_TARNAME@
144   -PACKAGE_VERSION = @PACKAGE_VERSION@
145   -PATH_SEPARATOR = @PATH_SEPARATOR@
146   -RANLIB = @RANLIB@
147   -SED = @SED@
148   -SET_MAKE = @SET_MAKE@
149   -SHELL = @SHELL@
150   -SIMD_FLAGS = @SIMD_FLAGS@
151   -STRIP = @STRIP@
152   -VERSION = @VERSION@
153   -abs_builddir = @abs_builddir@
154   -abs_srcdir = @abs_srcdir@
155   -abs_top_builddir = @abs_top_builddir@
156   -abs_top_srcdir = @abs_top_srcdir@
157   -ac_ct_CC = @ac_ct_CC@
158   -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
159   -am__leading_dot = @am__leading_dot@
160   -am__tar = @am__tar@
161   -am__untar = @am__untar@
162   -bindir = @bindir@
163   -build = @build@
164   -build_alias = @build_alias@
165   -build_cpu = @build_cpu@
166   -build_os = @build_os@
167   -build_vendor = @build_vendor@
168   -builddir = @builddir@
169   -datadir = @datadir@
170   -datarootdir = @datarootdir@
171   -docdir = @docdir@
172   -dvidir = @dvidir@
173   -exec_prefix = @exec_prefix@
174   -host = @host@
175   -host_alias = @host_alias@
176   -host_cpu = @host_cpu@
177   -host_os = @host_os@
178   -host_vendor = @host_vendor@
179   -htmldir = @htmldir@
180   -includedir = @includedir@
181   -infodir = @infodir@
182   -install_sh = @install_sh@
183   -libdir = @libdir@
184   -libexecdir = @libexecdir@
185   -localedir = @localedir@
186   -localstatedir = @localstatedir@
187   -mandir = @mandir@
188   -mkdir_p = @mkdir_p@
189   -oldincludedir = @oldincludedir@
190   -pdfdir = @pdfdir@
191   -prefix = @prefix@
192   -program_transform_name = @program_transform_name@
193   -psdir = @psdir@
194   -sbindir = @sbindir@
195   -sharedstatedir = @sharedstatedir@
196   -srcdir = @srcdir@
197   -sysconfdir = @sysconfdir@
198   -target_alias = @target_alias@
199   -top_builddir = @top_builddir@
200   -top_srcdir = @top_srcdir@
201   -SUBDIRS = src tools test examples
202   -ACLOCAL_AMFLAGS = -I m4
203   -include_HEADERS = include/gf_complete.h include/gf_method.h include/gf_rand.h include/gf_general.h
204   -all: all-recursive
205   -
206   -.SUFFIXES:
207   -am--refresh:
208   - @:
209   -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
210   - @for dep in $?; do \
211   - case '$(am__configure_deps)' in \
212   - *$$dep*) \
213   - echo ' cd $(srcdir) && $(AUTOMAKE) --gnu --ignore-deps'; \
214   - cd $(srcdir) && $(AUTOMAKE) --gnu --ignore-deps \
215   - && exit 0; \
216   - exit 1;; \
217   - esac; \
218   - done; \
219   - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps Makefile'; \
220   - cd $(top_srcdir) && \
221   - $(AUTOMAKE) --gnu --ignore-deps Makefile
222   -.PRECIOUS: Makefile
223   -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
224   - @case '$?' in \
225   - *config.status*) \
226   - echo ' $(SHELL) ./config.status'; \
227   - $(SHELL) ./config.status;; \
228   - *) \
229   - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
230   - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
231   - esac;
232   -
233   -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
234   - $(SHELL) ./config.status --recheck
235   -
236   -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
237   - cd $(srcdir) && $(AUTOCONF)
238   -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
239   - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
240   -
241   -include/config.h: include/stamp-h1
242   - @if test ! -f $@; then \
243   - rm -f include/stamp-h1; \
244   - $(MAKE) $(AM_MAKEFLAGS) include/stamp-h1; \
245   - else :; fi
246   -
247   -include/stamp-h1: $(top_srcdir)/include/config.h.in $(top_builddir)/config.status
248   - @rm -f include/stamp-h1
249   - cd $(top_builddir) && $(SHELL) ./config.status include/config.h
250   -$(top_srcdir)/include/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
251   - cd $(top_srcdir) && $(AUTOHEADER)
252   - rm -f include/stamp-h1
253   - touch $@
254   -
255   -distclean-hdr:
256   - -rm -f include/config.h include/stamp-h1
257   -
258   -mostlyclean-libtool:
259   - -rm -f *.lo
260   -
261   -clean-libtool:
262   - -rm -rf .libs _libs
263   -
264   -distclean-libtool:
265   - -rm -f libtool
266   -install-includeHEADERS: $(include_HEADERS)
267   - @$(NORMAL_INSTALL)
268   - test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
269   - @list='$(include_HEADERS)'; for p in $$list; do \
270   - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
271   - f=$(am__strip_dir) \
272   - echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
273   - $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
274   - done
275   -
276   -uninstall-includeHEADERS:
277   - @$(NORMAL_UNINSTALL)
278   - @list='$(include_HEADERS)'; for p in $$list; do \
279   - f=$(am__strip_dir) \
280   - echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
281   - rm -f "$(DESTDIR)$(includedir)/$$f"; \
282   - done
283   -
284   -# This directory's subdirectories are mostly independent; you can cd
285   -# into them and run `make' without going through this Makefile.
286   -# To change the values of `make' variables: instead of editing Makefiles,
287   -# (1) if the variable is set in `config.status', edit `config.status'
288   -# (which will cause the Makefiles to be regenerated when you run `make');
289   -# (2) otherwise, pass the desired values on the `make' command line.
290   -$(RECURSIVE_TARGETS):
291   - @failcom='exit 1'; \
292   - for f in x $$MAKEFLAGS; do \
293   - case $$f in \
294   - *=* | --[!k]*);; \
295   - *k*) failcom='fail=yes';; \
296   - esac; \
297   - done; \
298   - dot_seen=no; \
299   - target=`echo $@ | sed s/-recursive//`; \
300   - list='$(SUBDIRS)'; for subdir in $$list; do \
301   - echo "Making $$target in $$subdir"; \
302   - if test "$$subdir" = "."; then \
303   - dot_seen=yes; \
304   - local_target="$$target-am"; \
305   - else \
306   - local_target="$$target"; \
307   - fi; \
308   - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
309   - || eval $$failcom; \
310   - done; \
311   - if test "$$dot_seen" = "no"; then \
312   - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
313   - fi; test -z "$$fail"
314   -
315   -$(RECURSIVE_CLEAN_TARGETS):
316   - @failcom='exit 1'; \
317   - for f in x $$MAKEFLAGS; do \
318   - case $$f in \
319   - *=* | --[!k]*);; \
320   - *k*) failcom='fail=yes';; \
321   - esac; \
322   - done; \
323   - dot_seen=no; \
324   - case "$@" in \
325   - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
326   - *) list='$(SUBDIRS)' ;; \
327   - esac; \
328   - rev=''; for subdir in $$list; do \
329   - if test "$$subdir" = "."; then :; else \
330   - rev="$$subdir $$rev"; \
331   - fi; \
332   - done; \
333   - rev="$$rev ."; \
334   - target=`echo $@ | sed s/-recursive//`; \
335   - for subdir in $$rev; do \
336   - echo "Making $$target in $$subdir"; \
337   - if test "$$subdir" = "."; then \
338   - local_target="$$target-am"; \
339   - else \
340   - local_target="$$target"; \
341   - fi; \
342   - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
343   - || eval $$failcom; \
344   - done && test -z "$$fail"
345   -tags-recursive:
346   - list='$(SUBDIRS)'; for subdir in $$list; do \
347   - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
348   - done
349   -ctags-recursive:
350   - list='$(SUBDIRS)'; for subdir in $$list; do \
351   - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
352   - done
353   -
354   -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
355   - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
356   - unique=`for i in $$list; do \
357   - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
358   - done | \
359   - $(AWK) ' { files[$$0] = 1; } \
360   - END { for (i in files) print i; }'`; \
361   - mkid -fID $$unique
362   -tags: TAGS
363   -
364   -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
365   - $(TAGS_FILES) $(LISP)
366   - tags=; \
367   - here=`pwd`; \
368   - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
369   - include_option=--etags-include; \
370   - empty_fix=.; \
371   - else \
372   - include_option=--include; \
373   - empty_fix=; \
374   - fi; \
375   - list='$(SUBDIRS)'; for subdir in $$list; do \
376   - if test "$$subdir" = .; then :; else \
377   - test ! -f $$subdir/TAGS || \
378   - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
379   - fi; \
380   - done; \
381   - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
382   - unique=`for i in $$list; do \
383   - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
384   - done | \
385   - $(AWK) ' { files[$$0] = 1; } \
386   - END { for (i in files) print i; }'`; \
387   - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
388   - test -n "$$unique" || unique=$$empty_fix; \
389   - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
390   - $$tags $$unique; \
391   - fi
392   -ctags: CTAGS
393   -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
394   - $(TAGS_FILES) $(LISP)
395   - tags=; \
396   - here=`pwd`; \
397   - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
398   - unique=`for i in $$list; do \
399   - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
400   - done | \
401   - $(AWK) ' { files[$$0] = 1; } \
402   - END { for (i in files) print i; }'`; \
403   - test -z "$(CTAGS_ARGS)$$tags$$unique" \
404   - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
405   - $$tags $$unique
406   -
407   -GTAGS:
408   - here=`$(am__cd) $(top_builddir) && pwd` \
409   - && cd $(top_srcdir) \
410   - && gtags -i $(GTAGS_ARGS) $$here
411   -
412   -distclean-tags:
413   - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
414   -
415   -distdir: $(DISTFILES)
416   - $(am__remove_distdir)
417   - test -d $(distdir) || mkdir $(distdir)
418   - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
419   - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
420   - list='$(DISTFILES)'; \
421   - dist_files=`for file in $$list; do echo $$file; done | \
422   - sed -e "s|^$$srcdirstrip/||;t" \
423   - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
424   - case $$dist_files in \
425   - */*) $(MKDIR_P) `echo "$$dist_files" | \
426   - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
427   - sort -u` ;; \
428   - esac; \
429   - for file in $$dist_files; do \
430   - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
431   - if test -d $$d/$$file; then \
432   - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
433   - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
434   - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
435   - fi; \
436   - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
437   - else \
438   - test -f $(distdir)/$$file \
439   - || cp -p $$d/$$file $(distdir)/$$file \
440   - || exit 1; \
441   - fi; \
442   - done
443   - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
444   - if test "$$subdir" = .; then :; else \
445   - test -d "$(distdir)/$$subdir" \
446   - || $(MKDIR_P) "$(distdir)/$$subdir" \
447   - || exit 1; \
448   - distdir=`$(am__cd) $(distdir) && pwd`; \
449   - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
450   - (cd $$subdir && \
451   - $(MAKE) $(AM_MAKEFLAGS) \
452   - top_distdir="$$top_distdir" \
453   - distdir="$$distdir/$$subdir" \
454   - am__remove_distdir=: \
455   - am__skip_length_check=: \
456   - distdir) \
457   - || exit 1; \
458   - fi; \
459   - done
460   - -find $(distdir) -type d ! -perm -755 -exec chmod u+rwx,go+rx {} \; -o \
461   - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
462   - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
463   - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
464   - || chmod -R a+r $(distdir)
465   -dist-gzip: distdir
466   - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
467   - $(am__remove_distdir)
468   -
469   -dist-bzip2: distdir
470   - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
471   - $(am__remove_distdir)
472   -
473   -dist-tarZ: distdir
474   - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
475   - $(am__remove_distdir)
476   -
477   -dist-shar: distdir
478   - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
479   - $(am__remove_distdir)
480   -
481   -dist-zip: distdir
482   - -rm -f $(distdir).zip
483   - zip -rq $(distdir).zip $(distdir)
484   - $(am__remove_distdir)
485   -
486   -dist dist-all: distdir
487   - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
488   - $(am__remove_distdir)
489   -
490   -# This target untars the dist file and tries a VPATH configuration. Then
491   -# it guarantees that the distribution is self-contained by making another
492   -# tarfile.
493   -distcheck: dist
494   - case '$(DIST_ARCHIVES)' in \
495   - *.tar.gz*) \
496   - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
497   - *.tar.bz2*) \
498   - bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
499   - *.tar.Z*) \
500   - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
501   - *.shar.gz*) \
502   - GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
503   - *.zip*) \
504   - unzip $(distdir).zip ;;\
505   - esac
506   - chmod -R a-w $(distdir); chmod a+w $(distdir)
507   - mkdir $(distdir)/_build
508   - mkdir $(distdir)/_inst
509   - chmod a-w $(distdir)
510   - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
511   - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
512   - && cd $(distdir)/_build \
513   - && ../configure --srcdir=.. --prefix="$$dc_install_base" \
514   - $(DISTCHECK_CONFIGURE_FLAGS) \
515   - && $(MAKE) $(AM_MAKEFLAGS) \
516   - && $(MAKE) $(AM_MAKEFLAGS) dvi \
517   - && $(MAKE) $(AM_MAKEFLAGS) check \
518   - && $(MAKE) $(AM_MAKEFLAGS) install \
519   - && $(MAKE) $(AM_MAKEFLAGS) installcheck \
520   - && $(MAKE) $(AM_MAKEFLAGS) uninstall \
521   - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
522   - distuninstallcheck \
523   - && chmod -R a-w "$$dc_install_base" \
524   - && ({ \
525   - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
526   - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
527   - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
528   - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
529   - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
530   - } || { rm -rf "$$dc_destdir"; exit 1; }) \
531   - && rm -rf "$$dc_destdir" \
532   - && $(MAKE) $(AM_MAKEFLAGS) dist \
533   - && rm -rf $(DIST_ARCHIVES) \
534   - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
535   - $(am__remove_distdir)
536   - @(echo "$(distdir) archives ready for distribution: "; \
537   - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
538   - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
539   -distuninstallcheck:
540   - @cd $(distuninstallcheck_dir) \
541   - && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
542   - || { echo "ERROR: files left after uninstall:" ; \
543   - if test -n "$(DESTDIR)"; then \
544   - echo " (check DESTDIR support)"; \
545   - fi ; \
546   - $(distuninstallcheck_listfiles) ; \
547   - exit 1; } >&2
548   -distcleancheck: distclean
549   - @if test '$(srcdir)' = . ; then \
550   - echo "ERROR: distcleancheck can only run from a VPATH build" ; \
551   - exit 1 ; \
552   - fi
553   - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
554   - || { echo "ERROR: files left in build directory after distclean:" ; \
555   - $(distcleancheck_listfiles) ; \
556   - exit 1; } >&2
557   -check-am: all-am
558   -check: check-recursive
559   -all-am: Makefile $(HEADERS)
560   -installdirs: installdirs-recursive
561   -installdirs-am:
562   - for dir in "$(DESTDIR)$(includedir)"; do \
563   - test -z "$$dir" || $(MKDIR_P) "$$dir"; \
564   - done
565   -install: install-recursive
566   -install-exec: install-exec-recursive
567   -install-data: install-data-recursive
568   -uninstall: uninstall-recursive
569   -
570   -install-am: all-am
571   - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
572   -
573   -installcheck: installcheck-recursive
574   -install-strip:
575   - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
576   - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
577   - `test -z '$(STRIP)' || \
578   - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
579   -mostlyclean-generic:
580   -
581   -clean-generic:
582   -
583   -distclean-generic:
584   - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
585   -
586   -maintainer-clean-generic:
587   - @echo "This command is intended for maintainers to use"
588   - @echo "it deletes files that may require special tools to rebuild."
589   -clean: clean-recursive
590   -
591   -clean-am: clean-generic clean-libtool mostlyclean-am
592   -
593   -distclean: distclean-recursive
594   - -rm -f $(am__CONFIG_DISTCLEAN_FILES)
595   - -rm -f Makefile
596   -distclean-am: clean-am distclean-generic distclean-hdr \
597   - distclean-libtool distclean-tags
598   -
599   -dvi: dvi-recursive
600   -
601   -dvi-am:
602   -
603   -html: html-recursive
604   -
605   -info: info-recursive
606   -
607   -info-am:
608   -
609   -install-data-am: install-includeHEADERS
610   -
611   -install-dvi: install-dvi-recursive
612   -
613   -install-exec-am:
614   -
615   -install-html: install-html-recursive
616   -
617   -install-info: install-info-recursive
618   -
619   -install-man:
620   -
621   -install-pdf: install-pdf-recursive
622   -
623   -install-ps: install-ps-recursive
624   -
625   -installcheck-am:
626   -
627   -maintainer-clean: maintainer-clean-recursive
628   - -rm -f $(am__CONFIG_DISTCLEAN_FILES)
629   - -rm -rf $(top_srcdir)/autom4te.cache
630   - -rm -f Makefile
631   -maintainer-clean-am: distclean-am maintainer-clean-generic
632   -
633   -mostlyclean: mostlyclean-recursive
634   -
635   -mostlyclean-am: mostlyclean-generic mostlyclean-libtool
636   -
637   -pdf: pdf-recursive
638   -
639   -pdf-am:
640   -
641   -ps: ps-recursive
642   -
643   -ps-am:
644   -
645   -uninstall-am: uninstall-includeHEADERS
646   -
647   -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
648   - install-strip
649   -
650   -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
651   - all all-am am--refresh check check-am clean clean-generic \
652   - clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
653   - dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \
654   - distclean-generic distclean-hdr distclean-libtool \
655   - distclean-tags distcleancheck distdir distuninstallcheck dvi \
656   - dvi-am html html-am info info-am install install-am \
657   - install-data install-data-am install-dvi install-dvi-am \
658   - install-exec install-exec-am install-html install-html-am \
659   - install-includeHEADERS install-info install-info-am \
660   - install-man install-pdf install-pdf-am install-ps \
661   - install-ps-am install-strip installcheck installcheck-am \
662   - installdirs installdirs-am maintainer-clean \
663   - maintainer-clean-generic mostlyclean mostlyclean-generic \
664   - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
665   - uninstall uninstall-am uninstall-includeHEADERS
666   -
667   -# Tell versions [3.59,3.63) of GNU make to not export all variables.
668   -# Otherwise a system limit (for SysV at least) may be exceeded.
669   -.NOEXPORT:
aclocal.m4
... ... @@ -1,621 +0,0 @@
1   -# generated automatically by aclocal 1.10 -*- Autoconf -*-
2   -
3   -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
4   -# 2005, 2006 Free Software Foundation, Inc.
5   -# This file is free software; the Free Software Foundation
6   -# gives unlimited permission to copy and/or distribute it,
7   -# with or without modifications, as long as this notice is preserved.
8   -
9   -# This program is distributed in the hope that it will be useful,
10   -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
11   -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
12   -# PARTICULAR PURPOSE.
13   -
14   -m4_if(m4_PACKAGE_VERSION, [2.61],,
15   -[m4_fatal([this file was generated for autoconf 2.61.
16   -You have another version of autoconf. If you want to use that,
17   -you should regenerate the build system entirely.], [63])])
18   -
19   -# Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
20   -#
21   -# This file is free software; the Free Software Foundation
22   -# gives unlimited permission to copy and/or distribute it,
23   -# with or without modifications, as long as this notice is preserved.
24   -
25   -# AM_AUTOMAKE_VERSION(VERSION)
26   -# ----------------------------
27   -# Automake X.Y traces this macro to ensure aclocal.m4 has been
28   -# generated from the m4 files accompanying Automake X.Y.
29   -# (This private macro should not be called outside this file.)
30   -AC_DEFUN([AM_AUTOMAKE_VERSION],
31   -[am__api_version='1.10'
32   -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
33   -dnl require some minimum version. Point them to the right macro.
34   -m4_if([$1], [1.10], [],
35   - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
36   -])
37   -
38   -# _AM_AUTOCONF_VERSION(VERSION)
39   -# -----------------------------
40   -# aclocal traces this macro to find the Autoconf version.
41   -# This is a private macro too. Using m4_define simplifies
42   -# the logic in aclocal, which can simply ignore this definition.
43   -m4_define([_AM_AUTOCONF_VERSION], [])
44   -
45   -# AM_SET_CURRENT_AUTOMAKE_VERSION
46   -# -------------------------------
47   -# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
48   -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
49   -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
50   -[AM_AUTOMAKE_VERSION([1.10])dnl
51   -_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
52   -
53   -# AM_AUX_DIR_EXPAND -*- Autoconf -*-
54   -
55   -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
56   -#
57   -# This file is free software; the Free Software Foundation
58   -# gives unlimited permission to copy and/or distribute it,
59   -# with or without modifications, as long as this notice is preserved.
60   -
61   -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
62   -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
63   -# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
64   -#
65   -# Of course, Automake must honor this variable whenever it calls a
66   -# tool from the auxiliary directory. The problem is that $srcdir (and
67   -# therefore $ac_aux_dir as well) can be either absolute or relative,
68   -# depending on how configure is run. This is pretty annoying, since
69   -# it makes $ac_aux_dir quite unusable in subdirectories: in the top
70   -# source directory, any form will work fine, but in subdirectories a
71   -# relative path needs to be adjusted first.
72   -#
73   -# $ac_aux_dir/missing
74   -# fails when called from a subdirectory if $ac_aux_dir is relative
75   -# $top_srcdir/$ac_aux_dir/missing
76   -# fails if $ac_aux_dir is absolute,
77   -# fails when called from a subdirectory in a VPATH build with
78   -# a relative $ac_aux_dir
79   -#
80   -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
81   -# are both prefixed by $srcdir. In an in-source build this is usually
82   -# harmless because $srcdir is `.', but things will broke when you
83   -# start a VPATH build or use an absolute $srcdir.
84   -#
85   -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
86   -# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
87   -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
88   -# and then we would define $MISSING as
89   -# MISSING="\${SHELL} $am_aux_dir/missing"
90   -# This will work as long as MISSING is not called from configure, because
91   -# unfortunately $(top_srcdir) has no meaning in configure.
92   -# However there are other variables, like CC, which are often used in
93   -# configure, and could therefore not use this "fixed" $ac_aux_dir.
94   -#
95   -# Another solution, used here, is to always expand $ac_aux_dir to an
96   -# absolute PATH. The drawback is that using absolute paths prevent a
97   -# configured tree to be moved without reconfiguration.
98   -
99   -AC_DEFUN([AM_AUX_DIR_EXPAND],
100   -[dnl Rely on autoconf to set up CDPATH properly.
101   -AC_PREREQ([2.50])dnl
102   -# expand $ac_aux_dir to an absolute path
103   -am_aux_dir=`cd $ac_aux_dir && pwd`
104   -])
105   -
106   -# AM_CONDITIONAL -*- Autoconf -*-
107   -
108   -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
109   -# Free Software Foundation, Inc.
110   -#
111   -# This file is free software; the Free Software Foundation
112